Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
0.6m2 Stainless Steel Upflow Pressure Screen For Paper Pulp Making
0.6m2 Upflow pressure screen
The upflow outflow pressure screen uses the bottom of the machine to feed the slurry, the screening part to the pulp, and the upper part to the tail slag. After this process slurry enters the machine sieve, the heavy slag will not rise to the screening site under the action of gravity and rotate at the bottom. It is collected in the heavy slag tank, so it is prevented from entering the screening area to wear away the blades and sieve plates, extending the service life and reducing production costs. Light impurities and air are discharged from the top tailings. Due to the short residence time of impurities in the machine, the possibility of impurity circulation is significantly reduced, and the screening efficiency is greatly improved. No dilution water throughout the screening process
1.supply scope:pressure screen,motor, joint, bolts, pressure meter
2. Main specification:
| Item | Unit | Details | Marks |
| Effective screen area | M2 | 0.6 | |
| Pulp consistency | % | 0.8-2 | |
| Slot size | Mm | 0.35 | |
| Pulp inlet pressure | Mpa | 0.20-0.30 | |
| Pulp outlet pressure | Mpa | Minus 0.02-0.05 | |
| Throughout | M3 | 80-150 | |
| Capacity | Ton/Day | 20-30 | |
| Inlet and outlet diameter | Mm | 200 | |
| Sealing water pressure | Mpa | 0.22-0.32 | Bigger than inlet pressure |
| Rotor speed | R/min | 460 | |
| Motor power | KW | 22 | |
| Size | 2200mm | 1200mm | 1800mm |
| Weight | G.W 2600 | N.W 2200 |
3. Features:Multi-rotor mechanical seal structure;Bar sieve drum;Upflow slurry feeding
4. Material description
1.Material material: All stainless steel in contact with the slurry, other carbon steel or A3 plate or HT
2.Cylinder head: stainless steel SS304σ6mm, rotor stainless steel precision casting and grinding
3.Spindle: 40Cr quenched and tempered
4.Sieve drum SS stainless steel 304, the surface is hard chrome plated
wedge wire screen basket
,wedge wire basket
-
3layer Polyester Top Forming Wire For Triple Wire Paper Carton Making Machine
3layer Polyester Top Forming Wire For Triple Wire Paper Carton Making Machine Polyester forming wire is a commonly used dewatering equipment in the papermaking industry. Early use of copper mesh, it is a new product gradually developed with the social progress and rapid development of science and ... -
stainless steel Vacuum Suction Roll For Transfering The Endless Felt On The Fourdrinier Paper Making Machine
Rubber covered vacuum reverse roll in the paper making machine The reverse roller is mainly used to transfer the endless felt to the paper making process through the transfer of the roller. It is an indispensable part of the papermaking machinery. Common rubber roller return rollers and vacuum ... -
Cylinder Mold Paper Machine Paper Rolls , HT250 Water Squeezing Rolls
Water squeezing rolls for the felt of the cylinder mold paper machine The squeezing roller is a device in the forming section of the cylinder paper machine, which is composed of two rubber rollers, which are mainly used for cleaning the felt after the belt is pulped. After the felt removes the ...
