Payment & Shipping Terms:
|Material:||Artificial Stone / Nitrile Rubber / PU||Roll Size:||Diameter 800mm|
|Lifting Method:||Pneumatic||Product Name:||Size Press Machine|
|Application:||Printing Paper/ Kraft Paper/liner Paper||Condition:||New|
paper machine dryer cylinder,
paper rewinding machine
This size press machine is inclined arrangement, and is formed by a pair of sizing rolls inclined at 30° in the horizontal direction. The paper sheets drawn from the dryer group enter the two rolls for surface sizing, and then enter the after-size group dryer to dry. Both rollers are sizing rollers, and the pressurized form is pneumatic. The double-curved pneumatic device, single-point transmission.
According to the arranged drive position, it can be divided into two types of left and right mobile phones. In the direction of paper exit, the right side of the drive is the right phone, and vice versa.
|Up roll||Φ700mm,artificial stone roll,rubber thickness 20mm|
|Bottom roll||Φ705mm,rubber roll,rubber thickness 20mm|
|Pressurized type||pneumatic pressure|
It consists of two sizing rollers, a pick-up roller, an olive roller, a feed hose, a scraper device, a glue stopping device, and a pneumatic pressurizing device. A rubber feeding tube is arranged above the sizing roller to supply glue between the two rollers, and the amount of glue is controlled by a valve in front of the rubber feeding tube, and a rubber plate with adjustable pressure is arranged on both ends of the sizing roller to prevent glue Run away on both sides of the roll surface to keep excess glue flowing in the glue pan below the sizing roll. The scraper device is used for paper stripping. Generally, the scraper should be lifted during normal production to prolong the service life of the applicator roller.
1: Frame and pressurizing device
The gluing machine frame has a box-shaped structure, cast iron, and pneumatic tire pressurized. The double-curved air intake pushes the pressing arm around the point to achieve a pressurizing action, and separated from by self-weight of the pressing roller. The line pressure is 60KN/cm.
1.1 Frame HT200 2pcs
1.2 Arm QT50-5 1pcs
1.3 Base plates HT150 2pcs
1.4 Bearing house HT200 2pcs
1.5 Distance fixed pipe welding joints
1.6 Air bag 2pcs
2.Sizing roller device
This machine has two rubberized sizing rollers, which are composed of fixed bearing house and sizing roller, and are assembled on the frame. The roller body is a casting with a wall thickness of 60 mm. The surface is covered with rubber. and the medium height is determined according to the width of the net paper.
2.1 Upper roller of sizing roller: φ800*2250mm, rubberized thickness 20mm, shaft diameter φ110mm,
The rubber hardness is “A” 96±2°,
2.2.Lower roller: φ805*2250mm, rubberized thickness 20mm, shaft diameter φ110mm,The rubber hardness is “A” 87±2°,
2.3 bearing housing HT200 4 pieces
3. the paper roller device
The device is composed of a bearing house and a paper-feeding roller. The roller body is a seamless steel pipe, and the surface is chrome-plated, and the plating thickness is 0.08-0.1 mm, and the self-belt drive and the loose paper take-up sheave.
3.1 paper feed roller 2 pieces
3.2 bearing with seat UCP211 2 pieces
4.olive paper roller device
The device is composed of a bearing seat and an olive paper-feeding roller. The roller body is a seamless steel pipe, and the surface is chrome-plated, and the plating thickness is 0.08-0.1 mm, with a loose paper take-up sheave.
4.1 Olive paper roller 2 pieces
4.2 Bearing with seat UCP211 2 pieces
The scraper device is composed of a bracket, a scraper holder and a lifting device. The scraper frame is a cast iron piece, and the angle between the scraper and the surface of the applicator roll is 20 degrees. The scraping blade is made of a phenolic laminate, and the lifting device is an eccentric cam structure.
5.1 bracket HT150 4 pieces
5.2 scraper holder HT150 2 pieces
5.3 cam HT150 2 pieces
6．glue supply device:
The device consists of a set of stainless steel tubes through which the compound is sprayed onto the sizing roll.
7. Gluing device:
The glue stopping device is a pair of gaskets. The position of the stoppers can be adjusted so that the gaskets are tightly attached to the surface of the two rubber rollers to block the rubber on both sides. In order to strictly control the liquid level of the glue compound, the transmission side gasket has an overflow. Hole and pipe joint, send excess rubber back to the glue box, the gasket is metal splint
8.pneumatic control box
The pneumatic control box is assembled on the operating frame and consists of a panel and pneumatic components. The gas from the air source enters the pressure reducing valve, the pressure gauge, the two-position five-way valve and the one-way throttle valve for the glue pressurization.
9. coupling , speed reducer, motor
Contact Person: Mr. Mark Zhang