High Efficiency Breaking Pulping Machine For Tetra Pak / Waste Milk Box

4. Tetra pak / waste milk box breaking and pulping machine to be recyled use

Paper-plastic separator can separate pulp and plastic from plastic materials such as milk boxes, wrapping paper, coated paper, paper cups, and PP bag-covered paper. It can be directly separated without heating or chemical solution, and water can be recycled. Increase the value of utilization. Because the separation effect is good, the separated pulp and plastic are very clean, plastic can be pelletized, and paper can be turned into pulp, which can realize new value. It is the first choice for plastic granules and paper making.

This equipment is a vertical structure. The main components of the main unit are: (the structure of the barrel body and the rotor adopts a combination of a double-headed spiral and a flying knife, a sieve plate, a pulp chamber, a bearing body assembly leather, a pulley, a foot, etc.

The main pulping mechanism is a double-headed spiral rotor (commonly known as a stirring dragon) and a flying knife.

During pulping, the speed of the motor is driven by the pulley through the pulley, which drives the double-headed spiral rotor on the main shaft to rotate at high speed, so that the slurry is subjected to pressure from the top to bottom. Spread around and flip up along the body. Work in this cycle to achieve the purpose of pulping. Because the shear points of the rotor and spiral blades are weak, the fibers of the waste paper will not be damaged. At the same time, it only peels off the light substances (such as plastic attached film) in the waste paper, and does not form fragments, which is more conducive to sieving from the slurry.

Specification:

1. High-concentration pulper rotor has high pulp concentration (about 3 percentage points higher than that of traditional high-concentration pulper); the treatment of waste paper deinking pulp can greatly reduce the energy consumption of pulp heating and chemical Consumption and strong degreasing effect, promote the ink particles to peel and disperse faster from the fiber; and it has almost no cutting effect on single fiber; and has less damage to impurities.

2. The discharging and diluting device can directly discharge the high-concentration slurry without diluting it in the pulper barrel, which greatly shortens the discharging time of the high-concentration slurry, reduces the power of the equipment, and saves power consumption. It is particularly suitable for the subsequent process. Demand for high consistency slurry.