Low Pressure Pulp Cleaner Stainless Steel Dump Rejector 1 Year Warranty
Type280 stainless steel dump rejector for the paper pulp cleaning
I. Introduction
Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The feed concentration is about 1-3%, the slag discharge concentration can reach 20%, the treatment efficiency is high, the fiber retention rate is high, and the recovery rate can reach more than 80%; only need to operate under normal pressure, and it is a closed operation to avoid the splashing of dirt, save the cost of slag discharge treatment, and fast long-term investment recovery.
II. Main specification
| Model | ZSZ1 | ZSZ2 | ZSZ3 |
| Size | Φ280 | Φ380 | Φ500 |
| Pulp consistency (%) | 1-3.5 | ||
| Slag consistency(%) | 15-20 | ||
| Capacity (t/d) | 10-20 | 20-35 | 40-70 |
| Power (kw) | 37 | 55 | 55 |
III. Structure introduction
1. The cylinder is welded by steel plate. The part in contact with the slurry is stainless steel. There are eight water spray pipes on both sides of the cylinder.
2. The rotor is a rotating rod with 32 blades fixed on it.
3. The sieve plate is a combination of two semi-circular sieve cylinders with a diameter of Φ2.0-Φ4.5mm. It can be used as required.


Stainless Steel Dump Rejector
,Low Pressure Pulp Cleaner
-
SS304 Shell 316 Suction Box Paper Machine Rolls Forged Shaft Fluting Vacuum Couch
S.S 304 Shell 316 Suction Box Forged Shaft Fluting Paper Machine Vacuum Couch Roll 1 shell 304 stailess steel 2 suction box 316 stainless steel 3 shaft head cast steel/forged steel 4 bearing SKF 5 sealing system graphite, high molecular polyethylene 6 bearing seat cast iron The vacuum couch roll is ... -
Grooved Rubber Covered Cast Iron Touch Roll Under Dryer For Toilet Paper Making Machine
Grooved rubber covered touch roll under the paper machine dryer The grooved touch roll is generally used under the large cylinder of the paper machine, and has the function of draining paper and draining water before entering the drying cylinder. The grooved touch roll is a rubber-covered roller. ... -
316L S.S Pressure Screen Basket Before Headbox 0.3mm Slot Size For Fluting base Paper
Pressure Screen Basket In Slot / Hole Type 304 / 316L Stainless Steel Material PRESSURE SCREEN IN THE PULP MAKING PROCESS Model PZSL-1 PZSL-2 PZSL3 PZSL-4 PZSL-5 PZSL-6 Hole size Ø1.1-5mm Slot size 0.15-1mm Screen area 0.3 0.5 0.6 1.2 2.0 3.0 Screen basket size Ø406*258mm Ø600*267 Ø600*355 Ø602*634 ...