Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
2400mm Printing Paper Processing Machine Frame Type Underfeed Rewinder
2400mm Frame type underfeed rewinder for printing paper
The paper rolls (called base paper rolls) produced by the paper machine are sequentially rerolled. After the paper is rerolled, it is made into finished paper.
The paper roll rolled by the paper roll machine is relatively soft, there may be broken or broken ends, the edges on both sides are not smooth, and the width of the paper web is not used in paper processing or printing machines. Most paper types (such as newsprint , Letterpress printing paper, wrapping paper, etc.) must pass through the rewinding machine to trim, slit, joint, and rewind on the paper roll core to form a finished paper roll of a certain specification and certain tightness requirements before leaving the factory
Specification of 2400mm Frame type underfeed rewinder for printing paper
| 1 | Paper variety | Printing paper |
| 2 | Paper grammage | 60-80g/m2 |
| 1 | Net paper width | 2400mm |
| 2 | Base jumbo roll diameter | Ø2000mm |
| 3 | Finished paper roll diameter | Ø1500mm |
| 4 | Working speed | 800m/min |
| 5 | Support roll diameter | Ø510mm |
| 6 | Brake type | Pneumatic type |
| 7 | Bottom blade s | Whole round bottom blades |
| 8 | Up slitting blades | 5pcs |
The frame type rewinding machine is a further optimization of the traditional ordinary rewinding machine. We adopt a more reasonable design and better raw materials to ensure the smooth operation of the machine during the work process.
paper machine dryer cylinder
,paper rewinding machine
-
Paper Machine Wire Part Vacuum Dewatering Stainless Steel Body And Ceramic Face Board Suction Box
The water leg type vacuum dewatering box in the fourdrinier paper machine 1. Structure: water leg type vacuum dewatering box (Wet suction box) is a low-vacuum (20-100 mm water column) box. It is fixed on a closed box by several panel strips with sharp front edges. Wide box surface. The panel ... -
Custom Stainless Steel Counterweight Hammer For Felt And Wire Sensor
The stainless steel counterweight hammer used in the felt and wire sensor Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. It is a ... -
380V Waste Paper Pulp Cleaner Dump Rejector For Tailings Treatment
2. Stainless steel dump rejector in the paper pulp cleaning system The rejects separator is an ideal equipment for tailings treatment in waste paper pulping system. Adopting closed operation, no splash of pulp water, good treatment effect, reducing fiber loss, and low slag disposal cost. It is a ...
