Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
High Consistency Slag Removal Machine For The OCC Paper Recycling
2. The high consistency pulp stuff slag remover for the OCC paper recycling
The double-cone high-efficiency and high-concentration slag remover is composed of inlet and outlet heads, upper cones, lower cones, pressure gauges, ball valves, high-pressure water pipes, sediment tanks and other components. Due to the unique design based on fluid mechanics, it can Work during the transportation process, without affecting the sand removal effect. The pulp passes through the slag remover once, and the good pulp in the impurities is washed back with pressure water, and the fiber loss is zero.
The cone is finished by high-strength cast iron quenching and tempering or wear-resistant ceramic, with a wall thickness of 5-10cm, wear-resistant and corrosion-resistant, and long service life.
Through the data shown in the pressure indicator of the inlet and outlet pulp, the pressure difference between the inlet and outlet pulp can be freely adjusted to achieve the separation effect and production capacity required by the design.
| Model | PHDC-1 | PHDC-2 | PHDC-3 | PHDC-4 | PHDC-5 | PHDC-6 | PHDC-7 | PHDC-8 |
|
Throughout (L/MIN) |
800- 1000 |
1200- 1400 |
1600- 1800 |
1800- 2600 |
3000- 4500 |
4500- 5800 |
5800- 7500 |
8000- 12000 |
| Consistency | 5% | |||||||
| Inlet pressure | 0.2-0.4Mpa | |||||||
| Outlet pressure | 0.1-0.25Mpa | |||||||
| Flushing water pressure | Inlet pressure + 0.02Mpa | |||||||
high density cleaner paper machine
,high density cleaners
-
Low Pressure Pulp Cleaner Stainless Steel Dump Rejector 1 Year Warranty
Type280 stainless steel dump rejector for the paper pulp cleaning I. Introduction Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The feed concentration is about 1-3%, the slag discharge concentration can reach 20%, the ... -
Pulp Cleaning Fiber Separator Machine Screening And Pulping Equipment
Type600 stainless steel fiber separator for the pulp cleaning The fiber separator is a screening and pulping equipment with a combination of disintegration, separation and screening functions to remove various impurities in the waste paper raw materials by utilizing the specific gravity difference ... -
Rubber Or PU Covered Q345B Steel Felt Wire Leading Roller For Paper Machine
Rubber Covered Or PU Covered Q345B Steel Felt/Wire Leading Roller For The Paper Machine Wet Forming Section Felt leading roll is most used for paper machines, mainly in the wire section, dryer section, and press section. its main function is to pass wire cloth, and blankets. the surface covering of ...
