1500 m/min Tissue Forming Felt for 11-20 gsm Virgin Wood Pulp Crescent Former Tissue Paper Machine
This forming felt is built for the forming section of crescent former tissue machines running at speeds up to 1500 m/min. It is matched to virgin wood pulp stock and to the light grammage range of 11–20 gsm tissue, where sheet formation must stay even while the machine runs close to its design speed.
- Machine type: crescent former tissue / sanitary paper machines
- Position: forming section, sheet forming and water release
- Furnish: virgin wood pulp
- Paper grades: 11–20 gsm tissue (toilet tissue, facial tissue, kitchen towel base paper)
- Machine design speed: up to 1500 m/min
| Item | Data |
|---|---|
| Product | Tissue paper machine forming felt (life paper series, type 2) |
| Application | Forming section of crescent former tissue machine |
| Stock / furnish | Virgin wood pulp |
| Paper grade | 11–20 gsm tissue |
| Machine speed | ≤ 1500 m/min |
| Length / width | Made to the customer's machine data |
Only the data confirmed by the source specification is listed above. Dimensions and seam type are produced against the machine information you supply, so no figure is assumed on our side.
On a crescent former, the felt and the forming wire run together over the forming roll. All of the water that leaves the stock in that short wrap has to pass through the felt, and the sheet is formed at the same moment. Two consequences follow:
- Water handling has to be even across the full width. Any band of low permeability shows up as a moisture streak and then as a grammage streak in the finished reel.
- The felt surface has to release the sheet cleanly. At high speed the sheet is transferred to the yankee by the pressure roll, so the felt face must carry the web without marking it or holding it back.
Because the machine runs up to 1500 m/min and the sheet is only 11–20 gsm, the felt is worked hard in both directions. That is the reason this structure is specified for this duty rather than a general press felt being substituted.
The felt is made to order, so the quotation is only as accurate as the machine data behind it. Please send:
- Machine type and manufacturer, plus design and operating speed
- Finished felt length, width and thickness you are currently running
- Paper grades and grammage range actually produced
- Furnish mix (virgin wood pulp ratio, any broke or recycled content)
- Seam or endless form, and the tension the machine applies
Felts are woven and needled against the confirmed machine data, then packed for export in moisture-proof wrapping inside a wooden case. Together with the felt we provide running-in guidance: flushing with hot water before start-up, gradual tension build-up over the first running days, and a check list for the first 72 hours on the machine. If formation or dewatering does not settle in that window, our technical team reviews the machine data with you instead of asking you to simply replace the felt.
No. The structure is specified against a machine design speed of up to 1500 m/min. For higher speed machines a different construction has to be selected from the tissue series.
It is produced to the form your machine requires; tell us which form you run and the dimensions, and the felt is woven accordingly.
Virgin wood pulp, producing tissue in the 11–20 gsm range.
Send us your machine data and current felt dimensions, and we will come back with the matching construction.
Crescent Former Tissue Forming Felt
,1500 m/min Tissue Machine Felt
,Virgin Wood Pulp Paper Felt
-
Stainless Steel Paper Machine Parts High Water Pressure Lined Ruby Needle Nozzle
The common high water pressure lined ruby needle nozzle for the paper machine parts washing Nozzles play an extremely important role in the papermaking process. From the headbox, wire pressing section, drying section, and winding section, nozzles are everywhere. The effect of the use of the nozzle ... -
Horizontal Winding Machine , Pneumatic Reeling Machine Matched With Paper Machine
The horizontal pneumatic type winding / reeling machine with good performance The Horizontal pneumatic type winding / reeling machine is matched with a paper machine with the same net paper width, and is used to roll the paper into a tight and uniform roll.During operation, the paper roll roller ... -
Stainless Steel Slag Disposal 10T/D 22kw Reject Sorter
The Whole Stainless Steel Reject Sortor Machine For Second Stage Of Coarse Pulp Cleaning In The Stock Preparation 1. Introduction Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The incoming pulp concentration is about 1-3%, and ...