Nitrile Rubber Covered Paper Machine Rolls For Size Press Machine High Strength Paper
2640mm Applicator rolls in the size press machine for high strength paper
The applicator roller is an important part of the surface sizing press machine. The surface sizing press machine continuously, uniformly and stably coats the emulsified glue on the surface of the paper. After a series of physical actions such as wetting, penetration and extrusion, An extremely thin waterproof layer is formed on the surface of the paper, which greatly improves the water absorption of the paper, and at the same time, improves the bonding strength between the fibers and the tightness of the paper under the action of the glue, thereby improving the lateral ring pressure index and longitudinal crack of the paper Long-term technical indicators.
The applicator upper roller is a chrome-plated roller or an artificial stone roller, and the lower roller is a special rubber roller for sizing. The upper roller is fixed, and the side of the rubber roller is pressurized upward.
| ROLL BODY | DIAMETER | SHAFT | Covered material | hardness | Thickness |
| Up roll: HT250 | Ø700MM | #45 steel Quenching and tempering | Artificial stone | SR A”100º±2 | 18mm |
|
Bottom roll: HT250 |
Ø705MM | #45 steeL Quenching and tempering | NBR | SR A”96º±2 | 18mm |
According to the drawings provided by customers or our professional meticulous rigorous drawing, advanced processing technology and equipment are used, and the rubber has good elasticity, moisture resistance, heat resistance, acid and alkali resistance and corrosion resistance, and the surface has accurate and uniform hardness. The maximum tolerance of hardness should be within the allowable range, and the aging resistance is good. Ensure that the rubber roller can perfectly fit the customer's paper machine, extend the service life, save costs for customers, and create more revenue.



Nitrile Rubber Paper Machine Roller
,Size Press Paper Machine Roll
,High Strength Paper Roller
-
Low Pressure Pulp Cleaner Stainless Steel Dump Rejector 1 Year Warranty
Type280 stainless steel dump rejector for the paper pulp cleaning I. Introduction Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The feed concentration is about 1-3%, the slag discharge concentration can reach 20%, the ... -
Inward Flow / Inflow Pressure Screen Stainless Steel For Paper Pulp Cleaning
Stainless steel inward flow / inflow pressure screen for the paper pulp cleaning The outer rotor inward flow / inflow pressure screen is an advanced pulp screening equipment, which can be used for pulp screening in the middle of pulping system and for pulp selection in front of the paper machine. ... -
304 Stainless Steel Hydrapulper Machine For Waste Paper And Broken Paper
Horizontal hydraulic pulper for waste paper and broken paper Specification of the hydropulper: Type Item 5m3 10m3 15m3 20m3 Effective volume (m3) 5 10 15 20 Capacity (t/d) 40-45 60-70 80-100 100-130 Pulp consistency (%) 3-5 Motor(KW) 75 132 185 250