Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
Ø2mm -Ø4mm Sieve Plate Hole Pulp Cleaner Rejects Separator Pulper Screen Plate
4. Rejects seperator screen plate made by stainless steel material
The rejects separator is an ideal equipment for tailings treatment in waste paper pulping system. Adopting closed operation, no splash of pulp water, good treatment effect, reducing fiber loss, and low slag disposal cost. It is a special equipment for treating tailings of equipment such as fiber separators and pressure screens
The screen plate is made by stainless steel , sieve plate hole size Ø2mm -Ø4mm .
Equipment failure and solutions
| Failures | Reason | Solutions |
| The current is too high |
Too much inlet pulp Inlet pulp consistency is too high Worn or severely damaged bearings Severe rotor imbalance vibration |
Reduced pulp feed Reduce the feed concentration Replace bearing Rotor calibration |
| Bearing temperature too high |
Insufficient or excessive bearing lubrication severely worn bearings The bearing is too tight or too loose with the shaft and bearing housing Rotor bending |
Add or reduce lubricant Clean or replace bearings Adjust fit Correct or replace the rotor |
| Much fiber loss |
Too much pulp feed, too high pulp concentration Screen is too large Insufficient water spray volume, low water spray pressure or blocked nozzle The clearance between the cleaning plate and the sieve plate is too large |
Reduce the feed volume and reduce the feed concentration Increase the diameter of the screen hole to increase the spray pressure or clean the blocked nozzle Adjust gaps and replace worn screens or cleaning plates |
Ø2mm-Ø4mm Sieve Plate Pulp Cleaner
,Pulp Cleaner Rejects Separator
,Sieve Hole Pulp Screen Plate
Mr. John Lou
Manager
- Email: daqiancorp.01@gmail.com
- Tel: 8615638823327
- WhatsAPP: 8615638823327/8615565063237
-
WeChat:
15638823327
-
High Concentration PLC Control Slag Removal Machine Stainless Steel Mateiral
The high density cleaner for the heavy slag in the waste carton paper pulp The high-concentration slag remover is an ideal device for removing high-quality metals, sand, and other heavy impurities in the pulp at a higher concentration to obtain high-quality pulp. It is also necessary for the ... -
D Shaped Continuous Paper Pulper Machine Equipped With Rope Winch And Settler
7. D shaped continuous hydropulper system for the waste carton paper recycling D type hydraulic pulper is designed on the basis of existing traditional pulper with reference to foreign advanced technology. Its main feature is that the volts rotor is off-center, making the paper material contact the ... -
Circular Pneumatic Paper Slitting Blades Aluminum Alloy Holder And SKD-11 Blades
Circular Pneumatic Paper Slitting Blades Alluminum Alloy Holder And SKD-11 Blades upper slitting round disc is the common use parts for the rewinding machine , it plays an important role for the machine continue good running. So the quality choice for it is very important. The blade uses national ...
