Customized Tissue Paper Embossing Rolls Steel To Steel

A little carelessness during the forming process of the embossing roll will cause bubbles to appear on the surface of the embossing roll. This requires the semi-finished product of the embossing roll manufacturer to pass through a cooling water device, and the surface of the waterproof roll on the production line will pass through the cooling water. Moisture is not easy to air dry. As a result, there are more air bubbles between the PE film of the PE film product and the coating material, and the sand surface product has more floating sand on the sanding surface.

Embossing
1. Eliminate air bubbles or floating sand and improve the surface quality of waterproof membranes.
2. It is made of special lines to prevent counterfeiting.

Embossing principle and requirements
Principle: The embossing roller device presses the smooth roller on the pattern roller by gravity. The connecting arm of the smooth roller is equipped with a pair of adjusting screws to adjust the gap and pressure of the embossing roller, so that the coils of different thicknesses can be Passed and can be pressed to a satisfactory pattern.
Requirements: The embossing roller is installed at a position about 2m behind the sanding and filming device. At this time, the surface of the coil has just begun to solidify but has not been cooled and hardened. The smooth roller is pressed on the coil, and the PE film under the coil is pressed by the flower roll The flower forms a uniform and beautiful embossing, which not only reduces air bubbles, but also achieves a beautiful effect