Product Details:
Payment & Shipping Terms:
|
| Material: | Stainless Steel | Size: | As Demands |
|---|---|---|---|
| Weight: | Depends | Customized: | Yes |
| Application: | Pulp Making | Pulp Consistency: | 0.8-1% |
| Highlight: | ceramic sandblasting nozzles,high density cleaners |
||
3. High consistency vortex cleaner for the cardboard paper pulp making
It is Deslagging equipment for high-concentration purification pulp.
Purifying waste pulp is more effective. It is an indispensable key equipment for recycling waste paper. It uses different proportions of fibers and impurities to separate heavy impurities from the pulp to achieve the purpose of purifying pulp. This equipment has a wide range of applications, which can be used for rough separation and purification of high-concentration pulp, and can also be used for selective purification of low-concentration pulp before the paper machine.
The slag remover has a small footprint, large production capacity, convenient operation, does not block the slag discharge opening, and has high purification efficiency. The slurry passes through the slag remover once, no tailing treatment equipment is required, the fiber loss is zero, and the cone is wear-resistant. Pressure resistance and long service life, it can achieve slag removal effect when it is installed in the slurry conveying process
| Model | PHDC-1 | PHDC-2 | PHDC-3 | PHDC-4 | PHDC-5 | PHDC-6 | PHDC-7 | PHDC-8 |
|
Throughout (L/MIN) |
800- 1000 |
1200- 1400 |
1600- 1800 |
1800- 2600 |
3000- 4500 |
4500- 5800 |
5800- 7500 |
8000- 12000 |
| Consistency | 5% | |||||||
| Inlet pressure | 0.2-0.4Mpa | |||||||
| Outlet pressure | 0.1-0.25Mpa | |||||||
| Flushing water pressure | Inlet pressure + 0.02Mpa | |||||||
The slag remover consists of a slurry inlet, a cylinder, an upper cone, a lower cone, a sediment tank, a slag discharge valve, a frame, etc., a double cone structure, a wear-resistant alumina ceramic liner, and stainless steel (304) Feeding chamber (12mm thickness), carbon steel carbon steel bracket, automatic slag discharge method. With PLC automatic control.
Inlet guide room, casing, bracket, sediment tank, rubber joint for in and out slurry, anchor bolt, including electric control box and air control box.
